TenTec
[Top] [All Lists]

Re: [TenTec] CENTURION CLEANING

To: <k9yc@arrl.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] CENTURION CLEANING
From: "mcelmer1" <mcelmer1@netecin.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 6 Dec 2011 20:49:07 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I bought one a few years ago and had an arcing problem develop. After 
pulling off the cover, I noticed a couple of burn marks on the Tune
 capacitor. A closer examination revealed the culprit: Damn cat!

Mike
W8TRN
----- Original Message ----- 
From: "Jim Brown" <k9yc@audiosystemsgroup.com>
To: <tentec@contesting.com>
Sent: Tuesday, December 06, 2011 17:49
Subject: Re: [TenTec] CENTURION CLEANING


> On 12/6/2011 3:44 PM, Richard Schmidt wrote:
>>   Have been in ham radio long years and
>> understand the problems accumulated dust can cause.
>
> Yup. The major concerns are the high power components and their cooling
> path. Figure out what that path is, and make sure that there's good air
> flow. Do your major cleaning there.  Pay the same attention to the power
> supply.  I tend to do most of my cleaning with a vacuum cleaner with a
> small nozzle. As to the chips -- don't do this during the winter, when
> there is a lot of static. Wait for summer.
>
> 73, Jim K9YC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>