[TenTec] 564

["n2wk" <n2wk@rochester.rr.com>]

Two glitches I observe:
(1)  Sometimes, more often than not, when I turn on power the S meter is 
active  indicating signals but the audio is mute for some delay, varies 
from  
fraction of second to seconds
(2) During a recent ssb QSO the receive  would not always come back to 
level 
it was before transmitting. Keying the  PTT will bring it back.

Any suggestions or "yeah it does that" always  appreciated

Paul K0UYA  HI Paul,I had the same problem with #1. The fix for our club Omni 
VI was to replace C16 (10uf) across pins 2 and 4 of U23 on the logic board. 73, 
Wayne N2WK