Thanks Wayne!
The item (2) appears to have been (key word been) related to a very obscure
intermittent antenna connection.
It hasn't done it since the antenna feeder was repaired and never did it on
dummy load
I will file the note on C16 and replace it time permitting.
Paul K0UYA
----- Original Message -----
From: "n2wk" <n2wk@rochester.rr.com>
To: <tentec@contesting.com>
Sent: Monday, April 02, 2012 3:37 AM
Subject: [TenTec] 564
> Two glitches I observe:
> (1) Sometimes, more often than not, when I turn on power the S meter is
> active indicating signals but the audio is mute for some delay, varies
> from
> fraction of second to seconds
> (2) During a recent ssb QSO the receive would not always come back to
> level
> it was before transmitting. Keying the PTT will bring it back.
>
> Any suggestions or "yeah it does that" always appreciated
>
> Paul K0UYA HI Paul,I had the same problem with #1. The fix for our club
> Omni VI was to replace C16 (10uf) across pins 2 and 4 of U23 on the logic
> board. 73, Wayne N2WK
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|