Thanks Wayne!
The item (2) appears to have been (key word been) related to a very obscure
intermittent antenna connection.
It hasn't done it since the antenna feeder was repaired and never did it on
dummy load
I will file the note on C16 and replace it time permitting.
Paul K0UYA
----- Original Message -----
From: "n2wk" <n2wk@rochester.rr.com>
To: <tentec@contesting.com>
Sent: Monday, April 02, 2012 3:37 AM
Subject: [TenTec] 564
Two glitches I observe:
(1) Sometimes, more often than not, when I turn on power the S meter is
active indicating signals but the audio is mute for some delay, varies
from
fraction of second to seconds
(2) During a recent ssb QSO the receive would not always come back to
level
it was before transmitting. Keying the PTT will bring it back.
Any suggestions or "yeah it does that" always appreciated
Paul K0UYA HI Paul,I had the same problem with #1. The fix for our club
Omni VI was to replace C16 (10uf) across pins 2 and 4 of U23 on the logic
board. 73, Wayne N2WK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|