*Probably will not help with the repair but, here is a .pdf that you may or
may not have.*
**http://www.qsl.net/tentec/manuals/585.pdf
On Fri, Jul 13, 2012 at 7:53 PM, Ben Hall <kd5byb@kd5byb.net> wrote:
> Good afternoon all,
>
> I've got a Ten-Tec Paragon (with matching 962 power supply) that is
> having a problem and I'm hoping there is an easy fix that doesn't
> require a trip back to the factory for repair.
>
> Here's what happens - when I turn it out, all of the LED indicators
> light up for a split second and then it turns off. The power LED on the
> power supply goes off at the same time.
>
> I disconnected the power supply, jumpered the two center pins, and its
> putting out a nice 13.80 volts. Even under a 15 amp load (the highest
> my electronic load will do!) its still putting out 13.3 volts.
>
> Depressing the reset button does nothing.
>
> Thoughts?
>
> thanks much and 73,
> ben, kd5byb
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|