Most certainly yes!
What you need is the Model 311 converter box that runs between the Orion
and Herc II. That's all.
While I don't believe the 311 is available anymore, the schematic is
floating around. Others have built the from scratch.
GL!
73,
Eric W3DQ
Washington, DC
Message: 13
Date: Sat, 23 Feb 2013 13:16:20 -0600
From: "Paul A. Ramey"<wg0g@arrl.net>
To:tentec@contesting.com
Subject: [TenTec] Hercules II & Orion
Message-ID:<51291584.4090803@arrl.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I have a Hercules II that is currently wired for remote use with my Omni
VI+.
Can the Hercules be used in remote mode with a Orion by changing the
plug to match the Orion's band data 15-pin plug or is the Orion
different than the Omni as the the band data it output?
I would like to use the Hercules on the second VFO/sub RX for S&Ping.
If it works Then I can keep my main amp tuned to my run freq.
Thanks
Paul, WG0G
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|