TenTec
[Top] [All Lists]

Re: [TenTec] OT: Openwire/Window Line and Bad Wx

To: tentec@contesting.com
Subject: Re: [TenTec] OT: Openwire/Window Line and Bad Wx
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 02 Aug 2013 14:56:55 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Actual parallel line experience: One Field Day we arrived at our usual site to put up a 300 foot around horizontal loop. We usually corner fed the Delta shaped loop at a corner with 450 ohm line we keep in Field Day stocks. About 50 feet at most was our usual feed, but we had a big wooden spool of various parallel ladder line lengths 450 and 300 ohms.

There had been and continued to be off and on, huge rains. We could not set up the tent on the ground that was flooded. The closest paved area was over 200 feet away. We tied off ladder line to trees and spliced more in with wire nuts, and even added in a stock of 300 ohm ladder line, until we reached the new location of the tent. The Dentron Super Tuner as always with that loop; was hooked up with a 4:1 balun external to the Tuner. Static discharge resistors of 150 k ohms went to a ground rod from each conductor right at the balun balanced side.

We found that the Tuner had no trouble matching the mixed up combination of differing impedance ladder lines, nor did we detect any signal losses compared to the usual shorter ladder line feed.

-Stuart
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>