I just (finally) reinstalled N4PY on my new (to me) ham radio computer.
I'm having to re-learn after so long of abstinence from using the software.
I will play with the step adjustment and see if I can get it to tune in 25Hz
or 50Hz steps.
73 - Rick, DJ0IP
(Nr. Frankfurt am Main)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Bob McGraw
- K4TAX
Sent: Wednesday, July 09, 2014 5:18 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Eagle tuning rate options?
No matter of what the value is, some will want it different.
I just control the radio with software and forget about it. That way it
does exactly what I want.
Software from N4PY does a wonderful job.
73
Bob, K4TAX
----- Original Message -----
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Wednesday, July 09, 2014 9:56 AM
Subject: Re: [TenTec] Eagle tuning rate options?
> Unfortunately NO, and as you say, 10Hz is too fine and 100 Hz too coarse.
> If you are at 100 Hz and want to go to 10 Hz, you have to push the button
> 4
> times.
> I wish there was a 50 Hz step.
> That would probably be a good compromise.
>
> 73 - Rick, DJ0IP
> (Nr. Frankfurt am Main)
>
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Barry
> N1EU
> Sent: Wednesday, July 09, 2014 4:37 PM
> To: Discussion of Ten-Tec Equipment
> Subject: [TenTec] Eagle tuning rate options?
>
> Had a quick question for Eagle owners out there. I see that you can vary
> the tuning rate by changing the vfo step by factors of 10 (1hz, 10hz,
> 100hz, etc). Is there also a slow/fast encoder setting like the Orion?
> 10X seems like a huge jump in tuning rate or maybe I'm missing something.
>
> I was watching the video at https://www.youtube.com/watch?v=olPBH7UH6sk
> and
> the tuning looks too slow for ssb. He seems to be using 10hz step. On
> the
> other hand, I know that 100hz step would normally be too coarse for ssb.
> I
> assume you couldn't quickly toggle between 10hz and 100hz - you would have
> to cycle through all six step sizes?
>
> Thanks/73,
> Barry N1EU
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|