Which one did you get? The kit, the assembled PCB, the assembled one in a box
with cables, or the assembled in a box with box?
Looks like he used some impedance transformers... (To provide isolation would
be my bet) in the audio path with a fixed resister to set the level. I
suspect the signal levels are wrong on the acc1 jack.
-----Original Message-----
From: "Brian Carling" <bcarling@cfl.rr.com>
Sent: 8/12/2014 2:25 PM
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Omni VII Digital
It's a commercial interface I got from eBay called EASYDIGI that appears to not
be conveying the transmit audio through to the ACC1 connector.
More results soon.
Best regards - Bry Carling
> On Aug 12, 2014, at 9:53 AM, Louis Ciotti <lciotti1@gmail.com> wrote:
>
> It should not be difficult. If using the TenTec provided cable (From
> the Manual):
>
> WHITE = pin 1, line level audio input.
> YELLOW = pin 4, line level audio output.
> RED = pin 5, FSK.
> BLACK = pin 3, push to talk
> Ground from the 46176 cable is connected to pin 2.
>
> Have you verified the cable is correct? It also sounds like you may
> be connecting Pin 1 to the speaker output. Not knowing what is inside
> the Omni VII, I wonder if you provided it with too much voltage on
> that pin at damaged the input circuit there.
>
>> On Tue, Aug 12, 2014 at 8:06 AM, <bcarling@cfl.rr.com> wrote:
>> Thank you Ed,
>>
>> I have tried all of those things. Still no audio on transmit wit hthe OMNI
>> VII.
>> I am glad my FT857D wasn't this difficult.
>>
>> 73 de AF4K, Bry
>>
>>> On 11 Aug 2014 at 12:26, Edward Feustel wrote:
>>>
>>> Brian,
>>> I had the same problem on my Orion (565) while using FLDIGI with the
>>> Ten-Tec kit to use the buffered audio input/output to/from the computer
>>> soundcard:no transmit.
>>>
>>> It was resolved when I did three things:
>>> 1. Shifted the audio input from the mike to the Accessory Input via menu
>>> 2. Turned on Vox Mode via front panel button
>>> 3. Adjusted the gain on the auxiliary input via the menu enough to
>>> invoke the vox via the menu.
>>>
>>> Now it works like a champ.
>>>
>>> 73,
>>> Ed, N5EI
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|