TenTec
[Top] [All Lists]

Re: [TenTec] WTB: working S meter for my Omni V

To: Peg Haese KB9LIE <kb9lie@yahoo.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] WTB: working S meter for my Omni V
From: Gary J FollettDukes HiFi <dukeshifi@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 1 Dec 2015 20:28:54 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
If you want to test the meter, take a 1.5 volt battery and put a 1 megOhm 
resistor in series with it and touch the positive of this to the meter positive 
and, of course, the battery negative to meter negative.

The needle should deflect a little when you do this.

Alternatively, if you have a digital DMM, measure the meter resistance but not 
in the Diode mode as that will put 0.6 VDC on the meter, and that is likely too 
much for the movement to handle, at least for very long.. The Ohmmeter should 
tell you the meter is from a few Ohms to maybe 100 Ohms max.

Now that won’t tell you if the meter is seized up. If you are VERY quick, you 
can put your DMM into “diode” test mode. Then connect the meter negative to DMM 
negative with a clip lead. Then VERY quickly tap the positive lead of the DMM 
to the positive of the meter while watching the meter to see if it moves.

These are low tech ways.

If you have a variable power supply, things get much easier. Put about 10 Ohms 
in series between the supply and the meter respective pins and turn the supply 
to zero output. Slowly turn up the voltage until you see the meter move just a 
little. That will confirm that the meter is functioning with no risk of 
damaging it.

As a last resort, I think I have one kicking around here if I can find it.

Gary


> On Dec 1, 2015, at 2:43 PM, Peg Haese KB9LIE via TenTec 
> <tentec@contesting.com> wrote:
> 
> I am looking for a working S meter for my Omni V. We put in a spare that we 
> had and it still doesn't work, so time to find out if it's the meter or the 
> rig.
> Any suggestions besides having a suitable meter? I have a buyer for the rig 
> but it needs to be working right hi hi.
> I will still have my Omni VII, Eagle and Jupiter, plus the Scout and 6N2. So 
> I won't be TT-less in case anyone is worried.
> 
> 73 de Peg KB9LIE in chilly far SW Wisconsin USA
> PS: It's already posted on the KG4KGL TT Parts for Sale site.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>