TenTec
[Top] [All Lists]

Re: [TenTec] Orion 2

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion 2
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 15 Mar 2016 13:23:31 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Congrats Greg and I'm sure you're very relieved!  It is unfortunately very
understandable how that encoder connection could have been loose.

73, Barry N1EU

On Tue, Mar 15, 2016 at 1:06 PM, <gyates@dreamscape.com> wrote:

> Thanks for the suggestion on the cable.  I took the Orion 2 apart and sure
> enough the cable to the sub was loose.  Put it back on and so far it seems
> to work like new.
>
> Barry, as I discussed with you last year had a problem with the audio.  I
> sent to Skyland Radio in Georgia while I was in Fl.  They had it repaired
> and a few days and held it until I headed back to upstate NY.  Radio
> arrived
> 1 day before me.
>
> Anyway, I have heard good reports on the company.  Anyone interested google
> it and check out their facebook page.  They work on things like reel to
> reel
> tape recorders, jukeboxes ect.....
>
> My thanks to the group for the suggestions.  Lots of little screws but it
> was worth it.  Now, guess I will send in my Orion 1 for him to look at.
>
> Greg
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Gary
> Follett
> Sent: Monday, March 14, 2016 11:53 AM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Orion 2
>
> Check to see if you can control the sub receiver with the main receiver
> encoder by selecting VFO A to control receiver two.
>
> If this works, most likely the cable from the sub receiver encoder shook
> loose in shipping.
>
> Remove the 12 black flat head screws that hold the front panel assembly in
> place and you should be able to see in there to see if the cable is off.
>
> Gary
>
> W0DVN
>
> Sent from my iPad
>
> > On Mar 14, 2016, at 4:46 PM, <gyates@dreamscape.com>
> <gyates@dreamscape.com> wrote:
> >
> > Good Morning,
> >
> >
> >
> > I just got my Orion 2 back from repair and encoder for sub does not
> > seem to work.  I can enter frequency directly and receiver works.  Any
> > ideas of what I may be doing wrong or some magic button I have not
> pushed.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Greg
> >
> > WB2BIN
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7497 / Virus Database: 4542/11815 - Release Date: 03/14/16
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>