If the CPU is the MC68EZ328 (Motorola), I believe it is the 3.3V supply. I
bought a couple last year from the seller on ebay and it looks to be an
exact replacement although I haven't had a need to try one yet.
If anyone has success in replacing one and getting a CPU board running
again, that would be an interesting thing to know.
BTW, if anyone has worked on an Orion which reports higher SWR than is
actually present, I would like to compare notes.
GL,
Jeff W4DD
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Barry N1EU
Sent: Friday, March 25, 2016 7:42 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Dragonball CPU for Ten-Tec Orion
You need to make sure you get the 3.3V version of the CPU.
The Orion II uses the MC68SZ328 (also 3.3V version)
73, Barry N1EU
On Thu, Mar 24, 2016 at 7:29 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:
> Orion uses MC68EZ328
>
> 73, Barry N1EU
>
> On Thu, Mar 24, 2016 at 9:05 PM, Marsh Stewart <marsh@ka5m.net> wrote:
>
>> It's good to know there are some Dragonball CPUs still available.
>> Thanks for sharing.
>>
>> If you wouldn't mind sharing the info, specifically which model
>> Dragonball CPU does the Orion use?
>>
>> 73,
>> Marsh, KA5M
>>
>>
>>
>> -----Original Message-----
>> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Tim
>> Wininger
>> Sent: Thursday, March 24, 2016 3:51 PM
>> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>> Subject: Re: [TenTec] Ten-Tec Repair Service -5 Stars
>>
>> Your correct Marsh. All functioning except the com port.....
>>
>> Just found some new old stock Dragonball CPU's on Ebay the same model
>> as used in the Orion.
>>
>> Will have to find out if TT able to replace them at this time for
>> future reference as I have four Orions currently. Obsolescence is
>> inevitable in todays technologies unfortunately.
>>
>> GL with your Orion II.
>>
>> GD,
>>
>> Tim , AB4B
>>
>>
>> On Thu, Mar 24, 2016 at 3:05 PM, Marsh Stewart <marsh@ka5m.net> wrote:
>>
>> > Tim,
>> >
>> > Thanks for sharing your recent experience with Ten-Tec repair service.
>> >
>> > I am a bit confused though. You wrote "I just had an Orion and
>> > Orion II repaired both of which are on their way back to me."
>> > Further on in your post you wrote " Orion had com port (RS-232 )
>> > problem ( lightning
>> > damage) which couldn't be resolved as it got to the Dragon Ball CPU
>> > ( no longer available)". Of course it is beyond Ten-Tec's control
>> > if a part is no longer available. So, as I read it, the Orion was
>> > repaired except for the RS-232 port? Or do I misunderstand?
>> >
>> > To me Jim Brown K9YC was making a comment on what I had written in
>> > my first post " From my first e-mail until FedEx delivered the
>> > transceiver back to me was only about 4 weeks. You may or may not
>> > consider that "fast", but I think that was pretty quick." Jim was
>> > sharing info he had about turn-around times for repairs from
>> > another transceiver manufacturer. In my view his comment was
>> > relevant to the thread. Just my opinion.
>> >
>> > 73,
>> > Marsh, KA5M
>> >
>> >
>> > -----Original Message-----
>> > From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of
>> > Tim Wininger
>> > Sent: Thursday, March 24, 2016 1:00 PM
>> > To: Kimberly Elmore <cw_de_n5op@sbcglobal.net>; Discussion of
>> > Ten-Tec Equipment <tentec@contesting.com>
>> > Subject: Re: [TenTec] Ten-Tec Repair Service -5 Stars
>> >
>> > I just had an Orion and Orion II repaired both of which are on
>> > their way back to me. 1.5 weeks round trip. Orion had com port
>> > (RS-232 ) problem ( lightning damage) which couldn't be resolved as
>> > it got to the Dragon Ball CPU ( no longer available) and a couple
>> > of other associated issue which I wasn't aware of repaired. The
>> > Orion II had a com port problem and was repaired without any other
issues discovered.
>> > Also had batteries replaced in both radios.
>> >
>> > The cost was minimal with 1.5 hrs bench time for both. The phoncons
>> > were very informative and cordial. I couldn't ask for any better
>> > communications in this evolution. I gave the service department my
>> > heartfelt thanks and encouraged them to keep at.
>> >
>> > So the beat goes on...........
>> >
>> > GD to all ,
>> >
>> > Tim, AB4B
>> >
>> > obtw...I really don't care what Elecraft service is , does or has
>> > done as it is irrelevant to this reflector IMHO
>> >
>> >
>> > On Thu, Mar 24, 2016 at 12:40 PM, Kimberly Elmore <
>> > cw_de_n5op@sbcglobal.net>
>> > wrote:
>> >
>> > > I'm curious about what failed. ANy details?
>> > > Kim N5OP
>> > >
>> > > From: Marsh Stewart <marsh@ka5m.net>
>> > > To: Ten-Tec <tentec@contesting.com>
>> > > Sent: Thursday, March 24, 2016 11:57 AM
>> > > Subject: [TenTec] Ten-Tec Repair Service -5 Stars
>> > >
>> > > I just wanted to share my very recent experience with Ten-Tec
>> > > repair service..
>> > >
>> > > After years of dependable service my Orion II broke. I sent an
>> > > e-mail to service@tentec.com describing the problem and
>> > > requesting a RA number. I received a prompt reply with an RA
>> > > number and ship-to
>> address.
>> > >
>> > > My Orion II was shipped back to Ten-Tec, repaired, aligned,
>> > > tested, and returned to me. The charge was less than expected.
>> > > From my first e-mail until FedEx delivered the transceiver back
>> > > to me was only about 4
>> > weeks.
>> > > You
>> > > may or may not consider that "fast", but I think that was pretty
>> quick.
>> > >
>> > > I have no knowledge of the overall status of Ten-Tec, and your
>> > > experience may be different, but in my experience Ten-Tec Repair
>> > > Service is alive and well.
>> > >
>> > > Marsh, KA5M
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|