and I see a need for someone to do the repair work. and I am considering doing
some of it.
the business model will demand a cost specified per hour, and that.. to me, is
a huge hurdle.
Have a great day,
--... ...-- Dale - WC7S in Wy
"Actions speak louder than words"
1856 - Abraham Lincoln
________________________________
From: TenTec <tentec-bounces@contesting.com> on behalf of Dale Putnam
<daleputnam@hotmail.com>
Sent: Saturday, October 28, 2017 4:49 PM
To: Discussion of Ten-Tec Equipment
Cc: Rick Cochran
Subject: Re: [TenTec] Orion designer
One of the reasons it is tuff to get folks to fix TT gear.. is the information
about that particular model may be in question, the parts maybe in a difficult
situation to find, and the time it takes to accomplish an acceptable repair.
Most of the TT repairs are a bit more time consuming than many want to do. Time
is money, therefore the cost gets outta reason.
Have a great day,
--... ...-- Dale - WC7S in Wy
"Actions speak louder than words"
1856 - Abraham Lincoln
________________________________
From: TenTec <tentec-bounces@contesting.com> on behalf of Rick Cochran via
TenTec <tentec@contesting.com>
Sent: Saturday, October 28, 2017 2:33 PM
To: Discussion of Ten-Tec Equipment
Cc: Rick Cochran
Subject: Re: [TenTec] Orion designer
Thanks for the response. It just seems odd that no former employees advertise
privately to repair Ten Tec gear.
It's getting more difficult to sell a Ten Tec rig due to uncertainty.
Thanks,
WO8L
Sent from my iPhone
> On Oct 28, 2017, at 4:17 PM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:
>
> Rick,
>
> I'm at least 6,000 miles away, across a big pond, and I visited Ten-Tec only
> once in my life.
> I don't think that makes me an expert on Ten-Tec.
>
> I have known Jack Burchfield for over 40 years and still correspond with
> him.
>
> I can indeed tell you where 3 of the people went. They work with me.
> Scott, Stan and Shannon all work at Vibroplex/Spiderbeam.
>
> Over the years I knew several others but most have long since retired.
>
> Surely there are dozens of others in our group who can better answer your
> question than I can.
>
> 73
> Rick, DJ0IP
>
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Rick
> Cochran via TenTec
> Sent: Saturday, October 28, 2017 9:27 PM
> To: Discussion of Ten-Tec Equipment
> Cc: Rick Cochran
> Subject: Re: [TenTec] Orion designer
>
> You seem to know about Ten Tec so here's my question. What happened to all
> the people who worked for Ten Tec over the years?
>
> There must be people who can repair these rigs. Or were they required to
> sign some kind of non-compete agreement?
>
> 73s,
>
> Rick
> WO8L
>
> Sent from my iPhone
>
>> On Oct 28, 2017, at 2:11 PM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:
>>
>> Jack Burchfield assisted with his team of engineers did the overall
> design.
>> Jack knows about as much about DSP software design as I do about Brain
>> Surgery.
>> What I liked about his concept was the idea of having two different
>> receiver technologies.
>> Gives us the best of both worlds.
>>
>> Some argue they want both receivers to be equally good.
>> Equally good also means equally bad because there are arguments for
>> both technologies.
>>
>> 73
>> Rick, DJ0IP
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7CDgparsons51%40hotmail.com%7Ca9bf397c28d54f6ab9bf08d51e563da4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636448278112715445&sdata=WGYGg36SyRlXGQUn02YrtEzE7wHui39sKMPvXkm%2BRhQ%3D&reserved=0
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7CDgparsons51%40hotmail.com%7Ca9bf397c28d54f6ab9bf08d51e563da4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636448278112715445&sdata=WGYGg36SyRlXGQUn02YrtEzE7wHui39sKMPvXkm%2BRhQ%3D&reserved=0
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7CDgparsons51%40hotmail.com%7Ca9bf397c28d54f6ab9bf08d51e563da4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636448278112715445&sdata=WGYGg36SyRlXGQUn02YrtEzE7wHui39sKMPvXkm%2BRhQ%3D&reserved=0
_______________________________________________
TenTec mailing list
TenTec@contesting.com
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7CDgparsons51%40hotmail.com%7Ca9bf397c28d54f6ab9bf08d51e563da4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636448278112715445&sdata=WGYGg36SyRlXGQUn02YrtEzE7wHui39sKMPvXkm%2BRhQ%3D&reserved=0
_______________________________________________
TenTec mailing list
TenTec@contesting.com
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7CDgparsons51%40hotmail.com%7Ca9bf397c28d54f6ab9bf08d51e563da4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636448278112715445&sdata=WGYGg36SyRlXGQUn02YrtEzE7wHui39sKMPvXkm%2BRhQ%3D&reserved=0
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|