Bob, your email is a great lead into what Rob Sherwood has been preaching for
about 6 or 7 years now:
"Consider Cost-of-Ownership (COO) when buying a new radio."
Potentially, every radio, regardless of cost, can become immediately obsolete
if for some reason one of its critical components suddenly goes End-of-Life.
That is why I personally have opted to never spend more than $2K for a new
radio, regardless of how good it is.
Before retirement, it was not such a big deal, but for most of us, retirement
means tighten the belt.
It seems now the destiny for most radios is, keep it as long as possible, then
sell it broken for parts.
With that in mind, about the only two radios that I would even look at twice
are the IC-7300 and TS-590S.
I fear if Ten-Tec ever does bring out a radio, it will be above my $2K limit.
73,
Rick, DJ0IP
(Nr. Frankfurt, Germany)
-----Original Message-----
From: TenTec <tentec-bounces@contesting.com> On Behalf Of Bob McGraw K4TAX
Sent: 08 August 2018 17:59
To: tentec@contesting.com
Subject: Re: [TenTec] Orion VFO Knobs
In many cases, the original supplier of the parts has discontinued specific
items. The new ownership has little to nothing to do with this fact. Some
parts were custom made for Tentec while some were made in their own tool and
die shop or injection molding facility. Those of course no longer exist.
Unless someone builds after market items, many parts for older radios {those 10
+ years} simply won't be available.
This also is the same for many other brands as well. I've encountered this
fact with my attempted repair of Kenwood, ICOM and Yaesu products and is one of
the reasons I've stopped repairing radios. No parts available in many cases.
In other instances, the supplier has a minimum of 100 piece order. If I have
to order 100 pieces just to get one or two, this makes the repair very
expensive. Certainly is not profitable for me.
Folks, we must realize that anything older than the Omni VII {now 10+ years
old}, Eagle {now 8+ years old} and Argonaut VI {now 6+ years old} are, in
many instances, in trouble with regard to parts. With my former company,
having been in charge of repair parts for products that are no longer in
production, we did forecast and purchase inventory to support products for 7
years. In most cases the supplier or vendor informed us that this was the last
production run on these items. This is inventory that takes space on the
shelves, and must be paid for in advance. Hence we have to spend dollars for
parts that may set on the shelf for 7+ years. The accountants do not like
this and the facility manager may say "why do we need to use this space for
obsolete parts"?
And in many instances our "forecast" was not sufficiently accurate and we
simply ran out of parts before expected. In some cases we were forced to limit
purchase quantities to prevent hoarding.
With Tentec and other brands, just be thankful you can get any service work
done and parts being available. Yea yea yea I know you're saying your 30 year
old radio still works and I can get it repaired. In general that is
correct.........until one of those unique parts fail. The Orion series has
several unique parts and many to most of the PC board assemblies are no long
available. If either fails, look for a "parts only radio" and hope the part
is good that you need.
This is no different than looking for a brake controller for anti-lock brakes
from a junker at the auto junk yard. Oh, the Dealer has them for $650.
That's 1/2 the value of the vehicle. Radios are much the same way.
73
Bob, K4TAX
On 8/8/2018 10:18 AM, David J. Ross wrote:
> Sorry to hear that. I bought the parts for my Paragon just last Nov. I had
> heard that service parts were drying up under the new ownership.
>
> -----Original Message-----
> From: TenTec <tentec-bounces@contesting.com> On Behalf Of km4bsham via
> TenTec
> Sent: Wednesday, August 8, 2018 11:10 AM
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Cc: km4bsham <km4bsham@aol.com>
> Subject: Re: [TenTec] Orion VFO Knobs
>
> Naturally "out of stock, try back at a later date ". Thanks
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
> -------- Original message --------From: "David J. Ross" <rossdj@verizon.net>
> Date: 8/7/18 6:32 PM (GMT-05:00) To: 'Discussion of Ten-Tec Equipment'
> <tentec@contesting.com> Subject: Re: [TenTec] Orion VFO Knobs I purchased one
> directly from TenTec but there was a $25 minimum order. I needed the plastic
> panel end ears so the ring was a price padder.
>
> -----Original Message-----
> From: TenTec <tentec-bounces@contesting.com> On Behalf Of Dave Beghtel
> via TenTec
> Sent: Tuesday, August 7, 2018 6:04 PM
> To: TenTec@contesting.com
> Cc: km4bsham@aol.com
> Subject: [TenTec] Orion VFO Knobs
>
>
> Is there any source for the newer vfo knobs with the solid rubber ring?
> Thanks, Dave KM4BS _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|