Gary,
It is the same on all bands.
I hear a tink sound when I unkey, but no sound when I key. Is the
relay on the filter board,
yellow about 1 inch long?
Joe N9VX
-------------------------------------------------------------
Is it the same on all bands?
When going to TX, do you hear the antenna relay clicking? (Listen very closely
as this radio’s really is very quiet.)
I have seen the coils go open on the reed relays TT used for antenna switching.
Gary
W0DVN
On Wed, Oct 10, 2018 at 2:41 PM Joe Word <n9vx.joe@gmail.com> wrote:
> My Pegasus has no transmit output.
> > Receive works fine.
> > No output on any band on CW or SSB.
> > Red TX light comes on.
> > It does draw power supply current changing with power setting.
> > SSB TX sounds good in monitor.
> > Has LDG tuner, no change if bypassed.
> > Running Ten-Tec software.
> > I have unplugged, cleaned and reconnect connectors,
> > I see no physical component damage.
>
> Any thoughts?
>
> Joe N9VX
>
>
> --
> I'd rather *talk* than* type*.
>
--
I'd rather *talk* than* type*.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|