That sounds like the antenna relay.
However, those relays often failed anyway. I have a bunch of them from an Omni
5 junker.
Can you send me a photo of the one in your radio so i am certain.?
Gary
> On Oct 10, 2018, at 3:15 PM, Joe Word <n9vx.joe@gmail.com> wrote:
>
> Gary,
>
> It is the same on all bands.
>
> I hear a tink sound when I unkey, but no sound when I key. Is the
> relay on the filter board,
>
> yellow about 1 inch long?
>
>
> Joe N9VX
>
> -------------------------------------------------------------
>
> Is it the same on all bands?
>
> When going to TX, do you hear the antenna relay clicking? (Listen very closely
> as this radio’s really is very quiet.)
>
> I have seen the coils go open on the reed relays TT used for antenna
> switching.
>
> Gary
>
> W0DVN
>
>
> On Wed, Oct 10, 2018 at 2:41 PM Joe Word <n9vx.joe@gmail.com> wrote:
>
>> My Pegasus has no transmit output.
>>> Receive works fine.
>>> No output on any band on CW or SSB.
>>> Red TX light comes on.
>>> It does draw power supply current changing with power setting.
>>> SSB TX sounds good in monitor.
>>> Has LDG tuner, no change if bypassed.
>>> Running Ten-Tec software.
>>> I have unplugged, cleaned and reconnect connectors,
>>> I see no physical component damage.
>>
>> Any thoughts?
>>
>> Joe N9VX
>>
>>
>> --
>> I'd rather *talk* than* type*.
>>
>
>
> --
> I'd rather *talk* than* type*.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|