Have repaired two VI s that have had this problem. First one had bad vfo ham
changed encoder but put one of the plugs off one. The other one was bad
connections on front control board . Byron AC9PA
Sent from my iPad
> On Nov 29, 2018, at 9:49 AM, Bill Cotter <n4lg@qx.net> wrote:
>
> Gary,
>
> Is the RTC battery still providing energy?
>
> 73 Bill N4LG
>
> At 09:49 PM 11/28/2018, you wrote:
>> H Greetings: I have an Omni 6 that starts boot up, goes through the process
>> of turning the S meter lamps on, then stops with all pushbuttons LED’s lit.
>> I checked the 20 MHz oscillator (good) and I checked all of the CPU address
>> lines and data lines, all of which are active. The only thing I have found
>> so far is that the real time clock, DS1285, which has a small crystal for
>> its timebase, is not running. What I wanted to learn is whether or not the
>> CPU will boot up without this cook’s being in operation. It seems to me
>> that, since this is a real time clock, it should be running all of the time,
>> even when the radio is off, and the DS1285 should keep time powered by the
>> backup battery. Gary _______________________________________________ TenTec
>> mailing list TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|