Nothing at all. No lights, nothing. It's as though 12vdc isn't even connected.
-----Original Message-----
From: Gary Follett <dukeshifi@comcast.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Cc: Bernie Skoch <k5xs@aol.com>
Sent: Sat, Jan 18, 2020 9:27 pm
Subject: Re: [TenTec] Orion II Won't Power Up
Do you hear any sign of a relay click sound when you power up (near the back by
the power input connector)?
Gary
> On Jan 18, 2020, at 9:14 PM, Bernie Skoch via TenTec <tentec@contesting.com>
> wrote:
>
> In the middle of transmitting today, my O2 went stone cold dead. We had high
> winds that may have briefly shorted the antenna.
> DC power into radio is good. Fuse good.
> There is a component labeled 5KP15A that appears to be a transient voltage
> suppression diode near the 12VDC input.
> Any clues of whether that might be what blew?
> Thanks.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|