Hi Rich - You didn’t mention what antenna tuner you’re using, but you’ll want
to assure your tuner will handle the power capabilities of the amplifier.
73
Steve - W5JK
> On Feb 25, 2020, at 8:13 AM, Richard Wagner via TenTec
> <tentec@contesting.com> wrote:
>
> I’ve never dealt with an Amplifier before. A friend gave me a Heath SB-200.
> It appears I have to make a connection between the AMP KEY terminal of the
> ACC-1 accessory connector and the AMP KEY Socket of the amp. A plug for the
> socket and short jumper wire were included with my Eagle. This appears to be
> all that is needed. I’ll connect from the Eagle to the Amp then through my
> Antenna Tuner to the Antenna. Does this seem OK?
>
> Rich Wagner
> K4MZE
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|