Tom, W8JI wrote:
"With 1500 watts from a 50 ohm line into a series capacitor, line current
(5.5 amperes) times reactance equals RMS voltage across capacitor. A 300
pF capacitor set at 120pf (736 ohms X) would have 5.5*736=4040 RMS or
5724 volts peak."
==========
A shunt feed capacitor value of 120pF on 160m would be needed if the
electrical height of the structure was between 3/8 wave and 1/2 wave
(closer to 1/2), and yes, the voltage across the capacitor would be quite
high.
If the structure was 1/4 wave electrically, the tuned value of the
capacitor would be about 650pF (134 ohms X), therefore the voltage with
1500 watts would be 5.5*134=737 VRMS.
As I said in my previous post, "typically about 700 volts with 1000 watts
applied".
73, de Earl, K6SE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|