Zero beating may not be "the" answer in all cases, keep in mind that some
operate with a shift to reject local QRM which you may not hear. Something to
keep in mind when wondering why they don't hear you where you think they should.
Another possibility is that they may have forgot to shut off their RIT/XIT.
Keep flexible is the best advice.
Cheers,
Julius
Julius Fazekas
N2WN
Tennessee Contest Group
http://www.k4ro.net/tcg/index.html
http://groups.google.com/group/tcg1?hl=en
Tennessee QSO Party
http://www.tnqp.org/
Elecraft K2/100 #4455
Elecraft K3/100 #366
Elecraft K3/100 #1875
--- On Tue, 2/2/10, David Raymond <daraymond@iowatelecom.net> wrote:
> From: David Raymond <daraymond@iowatelecom.net>
> Subject: Re: Topband: Narrow Filtering
> To: "TopBand" <topband@contesting.com>
> Date: Tuesday, February 2, 2010, 10:22 PM
>
> > When there is a run station every 300 Hz, it becomes
> difficult
> > to distinguish between a station calling me
> off-frequency
> > vs a station calling my "neighbor" on-frequency.
>
> The importance of zero beating the station being called
> becomes increasingly
> important. The art of zero beat is certainly not what
> it used to be.
> Compounding this with stations running extremely narrow
> bandwidths creates a
> lot of confusion and frustration. When you add in
> excessive QRQ and 2
> seconds of listening time between CQs (or less), it's no
> wonder some big run
> stations miss a lot of Qs. It's not exactly like
> running JA from NA on 10m
> in the peak of the sunspot cycle.
>
> 73. . .Dave
> W0FLS
>
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|