> Assuming a voltage is put on the transmission line one would have
> thought the reason is not just phasing.
If one studies operation of the two wire Beverage, the only effect of
reversing the two wire line would be in phase of signals arriving from
the feed end. That would imply that polarity of the two wire line
would only matter when attempting to phase two wire beverages - e.g,
parallel or staggered (echelon) configurations.
73,
... Joe, W4TV
On 8/11/2011 5:46 AM, John G3PQA wrote:
> From: "Mike Waters" W0BTU
> Sent: Wednesday, August 10, 2011 9:57 AM
> Subject: Re: Topband: Bi-Directional Beverage Question
>
>
>> So other than phasing two Beverages, has anyone found a reason why DX
>> Engineering does this?
>>
>> 73, Mike
>
>
> Something I have wondered about as well.
> Assuming a voltage is put on the transmission line one would have thought
> the reason is not just phasing.
> I have some ideas but pure speculation.
> Surely someone on this group must know?
>
> 73, John
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|