Topband
[Top] [All Lists]

Re: Topband: QRP Question

To: topband@contesting.com
Subject: Re: Topband: QRP Question
From: "Keith Jillings (G3OIT)" <g3oit.keith@jillings.org.uk>
Date: Tue, 13 Dec 2011 09:58:08 +0000
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On 13/12/2011 05:32, W0MU Mike Fatchett wrote:
> Really?
>
> FCC rules:
>
> (c) One or more indicators may be included with the call sign. Each
> indicator must be separated from the call sign by the slant mark (/) or
> by any suitable word that denotes the slant mark. If an indicator is
> self-assigned, it must be included before, after, or both before and
> after, the call sign.*No self-assigned indicator may conflict with any
> other indicator specified by the FCC Rules or with any prefix assigned
> to another country.*
>
> *M              England (M3xxx and M6xxx - Foundation Class Licence,
>                           All others - Full Licence Grade)                   
> 14  27*

If I understood right, the "I'm in another country" bit goes in front 
over here, so a US amateur visiting the UK would be M/W1BB and if 
operating mobile, would be M/W1BB/M.

When I drive in Germany, I'm DL/G3OIT/M.

I recall that when I operated in the USA, I was told to use G3OIT/W8 so 
maybe the US puts the visitor flag in a different place.

Certainly, if I heard W1BB/M I would think he was in his car in the USA, 
not in the UK.

I agree, though, that it's pointless to sign /QRP.  I suppose the next 
step would be for those with a good linear to sign /QRO_BUT_LOUSY_ANTENNA

We used to have /A (alternative location) but that was dropped and we're 
told to use /P (even if the kit isn't portable).

There is also /AM but the authorities here aren't keen to issue permits 
for that - I tried once:  the requirements were impossible to meet.

We do still have /M and /MM with various restrictions applying.

73 and Good Yule,


Keith
G3OIT
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>