On 1/25/2012 11:27 AM, ct1ilt@sapo.pt wrote:
> My question is regarding the feeding of the antenna, should it be
> straight with 50 Ohm cable?
Hi Filipe,
That's the best solution, assuming that you have a tuner in the shack
(or an amplifier with a tuned output that can handle a modest mismatch),
and that you are using big coax (RG8, RG213). The loss in coax is so
small on 160M that it doesn't matter unless it's a VERY long run. Yes,
there will be standing waves on the antenna, but with the dimensions
you've listed, they should not be high enough to cause overheating or
voltage breakdown.
73, Jim K9YC
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|