Topband
[Top] [All Lists]

Re: Topband: T Vertical feed and radials

To: <ct1ilt@sapo.pt>, "'Top Band List List'" <topband@contesting.com>
Subject: Re: Topband: T Vertical feed and radials
From: "W0UCE" <w0uce@nc.rr.com>
Date: Wed, 25 Jan 2012 15:53:38 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Filipe:

Why bother putting out radials when you can use a K2AV 160 Meter Folded
Counterpoise? 

Take a look: http://www.w0uce.net/K2AVantennas.html

73,
Jack W0UCE

-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of ct1ilt@sapo.pt
Sent: Wednesday, January 25, 2012 2:28 PM
To: topband@contesting.com
Subject: Topband: T Vertical feed

Hi Everyone,

just finishing puting up a T Vertical (exactly in T shape) using 2  
supports at the ends.

The vertical portion is 18m and the T is 17m to each side (34m total).

I am laying radials from 20m - 40m (have about 20 right now).

My question is regarding the feeding of the antenna, should it be  
straight with 50 Ohm cable? Should I make some impedance transformer?  
(I have FT240-61) that I could use.

Thanks for help, getting ready here for CQ WW cw 160M.

73's Filipe CT1ILT aka CR6K

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>