So much for part 15.
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of Bill Wichers
Sent: Wednesday, July 04, 2012 6:34 PM
To: K4PI@BELLSOUTH.NET; TOPBAND@CONTESTING.COM
Subject: Re: Topband: Progress with ugly computer noise
A lot, probably most, of the really cheap UPSes are just switching step-up
converters. The easy way to spot them is from the crazy ratings like
"1000va" but only 3 amps (which should be about 360va). They sell them based
on people thinking "bigger is better" even though a .36 power factor is
pretty useless. I used to always think apc's .7 was misleading... The big
commercial units are .8-.9.
I've personally always had good luck with the apc smartUPS line for small
upses. They are sinewave output (and surprisingly good when checked w/ a
scope), and pretty clean due primarily to their pseudo-ferroresonant design.
I'd stay away from the backUPS line though since those aren't much different
from the el-cheapo units.
Note that supposedly "bad" smartUPS upses can be found for cheap at swaps
and on ebay. Almost always all that is needed is a new set of batteries to
get them running again.
-Bill
[Sent using Blackberry Messaging]
----- Original Message -----
From: topband-bounces@contesting.com <topband-bounces@contesting.com>
To: TOPBAND <TOPBAND@CONTESTING.COM>
Sent: Wed Jul 04 18:14:07 2012
Subject: Topband: Progress with ugly computer noise
Be careful with UPS units as I have seen them cause more problems noise wise
that computers. A friend of mine had a really bad one he had to unplug to
operate on any band. Everything was clean once he got rid of that thing..
73 Mike K4PI _______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|