Soldering in wild Alaska/KL7. Two hands and a mouth. Wire supported in one
hand, butane/propane torch in other, solder roll in the mouth (don't tongue the
contents) with a long lead of solder feeding the joint. Face downwind to avoid
burns.
After suffering numerous heating related failures at the soldered joints during
subsequent wind events, I now use these heat shrink crimp connectors:
http://www.youtube.com/watch?v=jCRsx38WRw8
Leaves the hands free to swat mosquitoes, or mouth available to yell at
approaching bears.
73, Gary NL7Y
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|