Topband
[Top] [All Lists]

Re: Topband: Soldering in the wild!

To: topband@contesting.com
Subject: Re: Topband: Soldering in the wild!
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Mon, 06 Aug 2012 07:03:36 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I believe the whole idea of the split bolt is that, properly tightened, 
it exerts enough pressure to crush through any existing corrosion and 
make a joint that is too tight for corrosion to intervene.

73, Pete N4ZR
The World Contest Station Database, at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at 
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000

On 8/5/2012 6:38 PM, Guy Olinger K2AV wrote:
> Then pressure has been enough to keep corrosion from between the
> clamped items...    Thanks, Guy.
>
> On Sun, Aug 5, 2012 at 4:16 PM, Jim Brown <jim@audiosystemsgroup.com> wrote:
>> So far I have not done so.
>>
>> Jim
>>
>> On 8/5/2012 11:21 AM, Guy Olinger K2AV wrote:
>>> Do you treat the connections with anything for corrosion protection,
>>> e.g. silicone grease?  73, Guy
>>>
>>> On Sun, Aug 5, 2012 at 2:31 AM, Jim Brown<jim@audiosystemsgroup.com>  wrote:
>>>>> I use copper split bolt connectors, both forelectrical and mechanical
>>>>> connections.
>> _______________________________________________
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>