The reversible single coax Beverage is described in ON4UN 's Low Band
DXing at least editions 4 & 5. I've built a couple elevated ones from
ebay RG58 and they work fine. I think RG6/RG59 would work as well with
small changes to the transformer ratios.
Grant KZ1W
On 1/11/2013 9:17 PM, Jim Miller wrote:
As a follow up I wonder if rather than using windowline, whose transmission
line performance would be subject to variations in weather, it might be
better to use coax. The outside of the shield would always be the antenna
but the interior acting as the transmission line would not be subject to
weather variations.
Coax reversible BOG?
73
jim ab3cv
_________________
Topband Reflector
_________________
Topband Reflector
|