To: | topband <topband@contesting.com> |
---|---|
Subject: | Re: Topband: Two 2:1 transformers to choose from!! |
From: | Mike Waters <mikewate@gmail.com> |
Date: | Sat, 24 Aug 2013 17:00:11 -0500 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
All those turns are better for what? For the winding that's connected to the coax (either 50 or 75 ohms), two turns is plenty. And good luck stuffing all that wire inside the holes in those binocular cores, especially if you use the recommended protective insulating liner. :-) 73, Mike www.w0btu.com On Sat, Aug 24, 2013 at 4:27 PM, Jim GM <jim.gmforum@gmail.com> wrote: > So the general concessions is that 7:5 turns was better. Do is 15:7 turns > or 21:10 turns better? Whats best for 160M ? > _________________ Topband Reflector |
Previous by Date: | Re: Topband: Two 2:1 transformers to choose from!!, Jim GM |
---|---|
Next by Date: | Re: Topband: Two 2:1 transformers to choose from!!, Charlie Cunningham |
Previous by Thread: | Re: Topband: Two 2:1 transformers to choose from!!, Jim GM |
Next by Thread: | Re: Topband: Two 2:1 transformers to choose from!!, Charlie Cunningham |
Indexes: | [Date] [Thread] [Top] [All Lists] |