Topband: End of a bias tee adventure?

[Pete Smith N4ZR <n4zr@contesting.com>]

After making all of the recommended changes, I hooked up my MFJ and got 
>650 readings regardless.  When connected to a 75 ohm dummy load, it 
reads completely normally, as does shorting the input (R=0_  If I had 
managed to damage the MFJ with DC voltage on the input, would you expect 
no readings at all (>650 everywhere)?
--
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

_________________
Topband Reflector Archives - http://www.contesting.com/_topband