Is no one going to suggest that a ³gyrator² should be put into the circuit
instead of an inductor?
There was a W3 who had some of the diodes for replacements. They are
surface mount and small! Obviously, one wants them to have a very low
conduction threshold voltage. I suspect Tom can suggest some diode choices
that will work.
Tod, K0TO
On 1/24/14, 11:41 AM, "Mike Waters" <mikewate@gmail.com> wrote:
>I would like to know where to get those diodes! Right after I bought my
>last MFJ-259B, I e-mailed MFJ about buying a spare or two just in case.
>They never replied.
>
>Anyone have a Mfg. name and P/N?
>
>73, Mike
>www.w0btu.com
>
>
>On Fri, Jan 24, 2014 at 9:49 AM, Bruce <k1fz@myfairpoint.net> wrote:
>
>> Years ago when I did in my MFJ meter, 50 ohms was reading 40 ohms. It
>>was
>> a real chore to change out the bad diode and calibrate.
>>
>_________________
>Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|