[Top] [All Lists]

Re: Topband: tool for install radials

Subject: Re: Topband: tool for install radials
From: john <>
Date: Tue, 09 Dec 2014 19:49:20 +0000
List-post: <">>
thanks,,,exactly what I want and need, cheap and simple    73 john w8wej
On 12/9/2014 18:51, Gary and Kathleen Pearse wrote:
Hi John. Find a piece of wood, maybe a 2x4 and saw a slot in one end width-wise deep 
enough to firmly hold a partially inserted staple without it bending. Push or drive 
with a hammer against the 2x4 and force the staple into the ground over the wire flush 
with the end of the wood. Remove the wood (might need to tip sideways to release the 
staple if it’s tight in the slot), turn the wood 90 deg, and push down again to 
finish implanting the staple. Might work, never done it.

73, Gary NL7Y

is there a simple , not overly expense tool to set land scape staples while 
standing??   at 73, I do not want to go through  being on my hands and knees 
driving the staples in with a hammer.
thanks   john w8wej
Topband Reflector Archives -

No virus found in this message.
Checked by AVG -
Version: 2015.0.5577 / Virus Database: 4235/8707 - Release Date: 12/09/14

Topband Reflector Archives -

<Prev in Thread] Current Thread [Next in Thread>