[Top] [All Lists]

Re: Topband: tool for install radials

To: "'Rob Atkinson'" <>, <>
Subject: Re: Topband: tool for install radials
From: "Jorge Diez - CX6VM" <>
Date: Tue, 9 Dec 2014 22:19:08 -0200
List-post: <">>
I read many times that radials must not be very deep. Will be interesting to
know if it´s true or false


-----Mensaje original-----
De: Topband [] En nombre de Rob
Enviado el: martes, 09 de diciembre de 2014 08:28 p.m.
Asunto: Re: Topband: tool for install radials

>One word of caution.
>Don't put the radials too far under the surface. 2, 3, 4, or 5 inches down
is too deep! Remember that you will be cooking the soil ( introducing losses
) between the radial wires and the surface.
>Try to keep the radial wires an inch or less below the surface.

That is absolutely not true.  There is no difference in performance at any
of those depths.


Topband Reflector Archives -

Este mensaje no contiene virus ni malware porque la protección de avast! 
Antivirus está activa.

Topband Reflector Archives -

<Prev in Thread] Current Thread [Next in Thread>