Topband
[Top] [All Lists]

Topband: loops and half square antennas

To: topband@contesting.com
Subject: Topband: loops and half square antennas
From: Jim <wa3mej@comcast.net>
Date: Wed, 1 Jul 2015 20:47:04 +0000 (UTC)
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Good afternoon to all, 
First I have never understood this fascination with loop antennas... full wave 
or not.  Unless they are put up vertically and even then they have to be feed 
at the correct spot (thanks for the education all those years ago Frank W3LPL) 
they just don't work DX very well.. in fact most loops I have ever used are 
cloud burners... again they have to be up pretty high and fed at the proper 
spot. 
  
Then the half square that I tried several years ago didn't work close to the 
"Inverted L" that  W3LPL talked me through in the very early 80's. 
In stead of all of this fancy stuff why not just get back to basics and go with 
what all the DXers have used for decades.  Now I gotta say the success that Guy 
Oliver (I think it was) with the FCP appears to work great.  I have heard 
several and I cant tell much difference from stations near them running the 
same power. 
  
Bottom line you cant cheat mother nature or said like Frank used to tell me 
..."THERE IS NO SILVER BULLET" 
  
That's my story and I am sticking to it. 
  
Jim 
  
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
<Prev in Thread] Current Thread [Next in Thread>