I have both systems.
The DXE 2 element system is 80 and 100 feet from my transmitter antenna,
respectively. I have run 1.5 kW for the last several years without any
problems, and with no sequencer.
The Hi-Z triangular system is even closer (65') and has never had a problem.
YMMV,
73,
Bob AA6VB
Sent from my iPhone
> On Nov 15, 2015, at 9:41 AM, Mike Greenway <K4PI@BELLSOUTH.NET> wrote:
>
> I have used the HI Z rx system and also the DXE ones. HI Z said in the past
> no need for a sequencer to get power off the amps if the xmit ant was close
> to the rx system antennas. Close I would say 60 foot. DXE has always
> suggested using a sequencer to get power off the amps during xmit. I am
> going to be forced to move a DXE system within 65 ft or so of my 160 vertical
> and wonder if anyone has had any experience of using the DXE without a
> sequencer close to their xmit antenna. Just hate to install one more thing I
> could get around but will if absolutely necessary. I know moving it closer
> is not an ideal situation but you do what you have to. Any input? 73 Mike
> K4PI
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|