I have used the HI Z rx system and also the DXE ones. HI Z said in the past
no need for a sequencer to get power off the amps if the xmit ant was close to
the rx system antennas. Close I would say 60 foot. DXE has always suggested
using a sequencer to get power off the amps during xmit. I am going to be
forced to move a DXE system within 65 ft or so of my 160 vertical and wonder if
anyone has had any experience of using the DXE without a sequencer close to
their xmit antenna. Just hate to install one more thing I could get around but
will if absolutely necessary. I know moving it closer is not an ideal
situation but you do what you have to. Any input? 73 Mike K4PI
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|