Topband
[Top] [All Lists]

Re: Topband: Capacity Hat Wire Size

To: "'Adrian Van Der Byl'" <vk2wf@bigpond.com>, "'Mike DeChristopher'" <mfdechristopher@gmail.com>, <topband@contesting.com>
Subject: Re: Topband: Capacity Hat Wire Size
From: "Adrian Van Der Byl" <vk2wf@bigpond.com>
Date: Thu, 4 Jan 2018 09:53:26 +1100
List-post: <mailto:topband@contesting.com>
Sorry it seems the link I posted got broken.

https://www.facebook.com/photo.php?fbid=440029073004475&set=pcb.745473342286
826&type=3&theater&ifg=1

73
Adrian 
VK2WF

-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Adrian
Van Der Byl
Sent: Thursday, 4 January 2018 9:44 AM
To: 'Mike DeChristopher'; topband@contesting.com
Subject: Re: Topband: Capacity Hat Wire Size

I have to agree with Mike, physical strength is important.
I am on an exposed ridge where the winds are quite strong.
I use stainless steel wire rope as part of the top hat supported with 19mm
dia al tubing spokes.

https://www.facebook.com/photo.php?fbid=440029073004475&set=pcb.745473342286
826&type=3&theater&ifg=1

Adrian
VK2WF


-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Mike
DeChristopher
Sent: Thursday, 4 January 2018 6:28 AM
To: topband@contesting.com
Subject: Re: Topband: Capacity Hat Wire Size

Bruce,

I used to resonate my tower on 80m with 22 ga wire in two directions.
Never a problem with power handling at 1.5kW; I probably would have used
bigger stuff if I had any in the garage at the time.

Like others here, I think the real issue is that these wires will become de
facto guy wires, and so physical strength becomes relevant.

73,
Mike N1TA


On Tue, Jan 2, 2018 at 10:31 AM, Bruce Osterberg <n9bx73@gmail.com> wrote:
> Good Morning:\
>
> To improve my 160 vertical I want to change its configuration from an 
> inverted L to a Capacity Hat Vertical.  Vertical will be 57 Feet high 
> with Capacity Hat wires.  I am using an 18 Meter Spider pole.  I plan 
> on running
> 1.5 KW to it.  Looking at spider pole website it says 18 Gage wire for 
> the Vertical part and 26 Gage wire for the capacity Hat.  But it says 
> nothing about the power handling capacity of these wires, (both 
> vertical and horizontal).  I know the spider pole is a bit flimsy at 
> the 55 foot level so a smaller wire is needed but I am sure someone on 
> this reflector has the answers I need.
>
> Bruce N9BX 73
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>