Today's Topics:
1. Re: Adding chicken wire or mesh on top of radial field
(Peter Bertini)
2. Re: Adding chicken wire or mesh on top of radial field
(Raymond Benny)
3. Re: Adding chicken wire or mesh on top of radial field
(n4is@n4is.com)
----------------------------------------------------------------------
Message: 1
Date: Sun, 3 Jun 2018 16:14:45 -0400
From: Peter Bertini <radioconnection@gmail.com>
To: topband@contesting.com
Subject: Re: Topband: Adding chicken wire or mesh on top of radial
field
Message-ID:
<CA+uDY2QO-x2Dac+bP7DYLnhHkKnEgkQh5kaPN8C4WgGLO_9ndA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Why would bonding the added matting be required if it is laid over or
beneath an existing radial field? It reduces ground losses regardless.
Peter
All,
Forgive me if this has already been posted. I have not been following TB as
well as I normally do.
http://www.sherweng.com/documents/GroundScreen-sm.pdf
Sherwood's article from HR Magazine.
Craig Clark K1QX
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|