| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: Adding chicken wire or mesh on top of radial field |
| From: | Rob Atkinson <ranchorobbo@gmail.com> |
| Date: | Tue, 5 Jun 2018 08:08:52 -0500 |
| List-post: | <mailto:topband@contesting.com> |
for permanent installation it's a waste of time because thin wire steel mesh (chicken fence mesh) will rust away in most ground in a short time. Recommend copper mesh but professionally it only seems to be employed around the base pier of voltage fed towers. For a current fed tower a lot of radials near the feed point, >= 90, is good enough. 73 Rob K5UJ _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Adding chicken wire or mesh on top of radial field, n4is |
|---|---|
| Next by Date: | Re: Topband: Adding chicken wire or mesh on top of radial field, Grant Saviers |
| Previous by Thread: | Topband: Adding chicken wire or mesh on top of radial field, Craig Clark |
| Next by Thread: | Re: Topband: Adding chicken wire or mesh on top of radial field, Charles Moizeau |
| Indexes: | [Date] [Thread] [Top] [All Lists] |