If it's silicone based, try isopropal rubbing alcohol-soak it if possible.
The alcohol loosens the silicone.
Good Luck,
Scott
KA1CLX
At 10:10 PM 4/6/97 -0500, Dennis Schaefer wrote:
>I'm refurbishing a used KT-34A. The capacitor caps have all turned white
>(maybe they WERE white when this one was made) and some of them have
>cracks. I have a new set of caps, but the problem is that the previous
>owner gobbed silicone all over the caps and other joints.
>
>I have removed silicone from coax connectors before, and I don't remember
>it being this tough. This stuff looks and feels like a silicone compound,
>but is not completely clear - has a little off-white tint to it. It seems
>tougher - adheres to the aluminum better. You can't just peel it off.
>
>Is there something that would make it easier to remove this stuff, or do I
>just need to keep whittling away with my single-edged razor blade?
>
>Dennis, W5RZ
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|