At 8:17 PM -0800 1/18/98, K7LXC wrote:
> The grips have a range so what you want is one that'll support 1/2 inch
>cable but big enough to go over the PL259. I don't have the p/n but your
>supplier can look it up.
The Kellums I have used for 0.35"-0.44" are great for RG8/213, but I have
to be very sure to run the coax through them =before= I install the coax
connector! Ask me how I know! :)
The standard PL-259 ring is roughly 0.70" diameter. Do they make a Kellems
that will go from 0.40" all the way to 0.70"?
73, Dick
--
Dick Flanagan W6OLD CFII Minden, Nevada DM09db (South of Reno)
Visit http://www.qsl.net/w7di/
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|