And, of course, before doing the below steps, put a mast in the boom to
mast fitting and , with the level, make the temp. mast straight up and
down.
On Tue, 9 Jun 1998, Charles H. Harpole wrote:
>
> I use a large construction square (the L shaped thing) and a long level.
> Set the edge of the square on an element and the other edge lines up with
> the level. Check both sides of el. relative to boom.
> Tighten. Check all elements thrice.
> 73, K4VUD
>
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|