Towertalk
[Top] [All Lists]

[TowerTalk] Elements out of Horizontal plane

To: <towertalk@contesting.com>
Subject: [TowerTalk] Elements out of Horizontal plane
From: cebik@utkux.utcc.utk.edu (L. B. Cebik)
Date: Tue, 23 Mar 1999 20:43:30 -0500 (EST)
Bill,

Your total beam side tilt of 10 degrees is not fatal, but still less than
otimum.  Several models average about 0.1-0.2 dB loss of gain and about 1
dB loss of F-B.  Impedance change is not great.  However, the pattern
begins to distort, even at 10 degrees, especially with respect to the
sides--which pinch in on the high side and flatten on the low--and a
slight misdirection of the main forward lobe.

All in all, I'd say that the biggest question may be mechanical:  in the
slippage, has anything been started that is going the create a road to
something much worse?  Moreover, when you have a reputation for being on
the level, a little tilt can ruin one's image.

Hope (most of) this is useful.

-73-

LB, W4RNL




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>