In a message dated 5/5/01 1:07:29 AM Pacific Daylight Time,
eric_schurman@hotmail.com writes:
> >I would also consider using one anchor per guy wire, or at least a
> >separate one for the top set. That way you'd spread the forces over a
> >couple
> >of anchors. If you can put the anchors out farther - say 100 or 120% or
> >more
> >- that'll reduce somewhat the forces on the anchors.
>
> Really? That's good to know. Are there any disadvantages (other than the
> greater guy material required) to the longer guys?
Not that I'm aware of. It just takes more real estate which is not
possible in many installations.
Cheers, Steve K7LXC
Tower Tech
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|