Towertalk
[Top] [All Lists]

[TowerTalk] Painting Fiberglass Spreaders?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Painting Fiberglass Spreaders?
From: K3BU@aol.com (K3BU@aol.com)
Date: Fri, 17 Aug 2001 10:19:16 EDT
I had second hand Gem Quad spreaders, after few more years nasty thing 
happened, the fiberglass rods started to separate from the criss-cross 
wrapping and eventually buckled in the storm. 
I would recommend to paint it with good marine paint as suggested before and 
check them thoroughly for any signs of separation.

Yuri, K3BU

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>