Towertalk
[Top] [All Lists]

[TowerTalk] 80m Dipole ssb/cw switching

To: <towertalk@contesting.com>
Subject: [TowerTalk] 80m Dipole ssb/cw switching
From: w7why@harborside.com (Tom Osborne)
Date: Thu, 15 Nov 2001 02:36:30 +0000


GALE STEWARD wrote:
> 
> One of these "pigtails" was attached (clipped)
> to each end of the vee. The only purpose of the
> insulator is to weigh down the end of the wire to keep
> the wind from wrapping it around the end of the vee.
> Worked good for many years.  

Hi Gale et al.

I have a piece of wire on teh end of my 80 meter dipole that I
just wrap around the uninsulated end of the dipole.  It doesn't
have to be added to both sides of the antenna.  Just add the
length to one side and it will work just as well.  73
Tom W7WHY

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>