Towertalk
[Top] [All Lists]

[TowerTalk] How to mount choke balun?

To: <towertalk@contesting.com>
Subject: [TowerTalk] How to mount choke balun?
From: W8JI@contesting.com (Tom Rauch)
Date: Sun, 18 Nov 2001 13:47:37 -0500
> I have my computer monitor setting just above my amplifier, and
> when I turn the amp on, I can see the 60 cycle vibrations on the
> screen.  Somehow the power transformer is interfering with the
> monitor so guess the magnetic field must be getting through the
> case somehow.  73

Skin depth is pretty thick in most materials at 60 Hz, that why 
effective shields on low frequencies are generally ferrous materials, 
to divert the magnetic flux. The amp probably was not designed to 
shield 60Hz, but rather to shield 1.8 MHz and higher, so the 
cabinet material might be aluminum or thin steel.

A time-varying magnetic field won't pass through conductive 
materials more than several skin depths thick, but of course skin 
depth increases with decreasing frequency.
73, Tom W8JI
W8JI@contesting.com 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>