Hello:
A gremlin decided to interfere in my DX chasing last night. I have an Orion
2800 rotator and all was working well when I noticed that as I depressed the
CCW button the numbers would rapidly decend for about 5 degrees and then
peter out and then stop - long before the destination heading. I had not
taken my finger off of the button. This forced me to re-depress the CCW
button and the same thing happened. Using the CW button was all normal -
ramp up to speed and then ramp down to target heading. I have not fooled
around with anything else on the box.
Any help would be appreciated.
Jamie
WB4YDL
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|