| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [Towertalk] Rotor internal noise |
| From: | K7LXC@aol.com (K7LXC@aol.com) |
| Date: | Mon, 8 Apr 2002 11:15:49 EDT |
In a message dated 4/8/02 8:08:49 AM Pacific Daylight Time, K4BEV@aol.com
writes:
> There seems to be way more grease on the bearings than is necessary (to
> me). How much grease should be in there?
The factory says "thimble full" for all the bearings for a HAM IV -
probably less for your smaller rotator. In other words - not much.
Cheers,
Steve K7LXC
TOWER TECH
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Towertalk] Guy Grip Question, K7LXC@aol.com |
|---|---|
| Next by Date: | [Towertalk] Rotator control box wiring CD-44 v. TR-44, gorslin@easymail.pathcom.com |
| Previous by Thread: | [Towertalk] Rotor internal noise, K4BEV@aol.com |
| Next by Thread: | [Towertalk] Sloper, dan r goddard |
| Indexes: | [Date] [Thread] [Top] [All Lists] |